Electrolux EKC63307X Manual de usuario descargar pdf (Pagina 19)

Installing the shelf support rails

Install the shelf support rails in opposite se-

quence.

The rounded ends of the shelf support

rails must point to the front!

Oven Ceiling

You can fold down the heating element on

the oven ceiling to clean the oven ceiling

easily.

Warning! Before you fold down the

heating element switch off the

appliance. Make sure that the

appliance is cold.

There is a risk of burns!

Folding down the heating element

1. Remove the shelf support rails.

2. Hold the heating element with the two

hands at the front

3. Pull it forwards against the spring pres-

sure and out along the support on both

sides.

4. The heating element folds down.

The oven ceiling is ready to clean.

Installing the heating element

1. Install the heating element in opposite

sequence.

Important! Install the heating element

correctly on the two sides above the

support on the inner wall of the oven.

2. Insert shelf support rails.

Oven door and glass panels

To clean the oven door remove it.

Caution! Be careful when you remove

the door from the appliance. The door

is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

A

A

3. Close the oven door until the first posi-

tion (angle approx. 45°).

45°

4. Hold of the oven door with one hand on

each side and pull it away from the oven

at an upwards angle.

Put the oven door with the outer side

down on a soft and level surface to

prevent scratches.

5. Now you can remove the inner glass

panels and clean them.

To install the door follow the procedure

in reverse.

The oven door has 2, 3 or 4 panels of

glass (depends on the model)

electrolux 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios