Electrolux EKI6762AOX Manual de usuario descargar pdf (Pagina 18)

8.5 Activating and deactivating

1. Press to activate the oven.

2. Repeatedly press to select the top

or main oven.

8.6 Setting the oven function

You can change the oven

function while the oven

operates.

Press to set an oven function.

The display shows the recommended

temperature.

If you do not change the this temperature

in less than approximately 5 seconds,

the appliance starts to heat.

8.7 Changing the oven

temperature

Press or to change the

temperature.

When the appliance is at the set

temperature, an acoustic signal sounds.

8.8 Deactivating an oven

function

Repeatedly touch until no oven

function shows in the display.

8.9 Heat-up indicator

When you activate an oven function, the

bars on the display come on one by one.

The bars show that the oven temperature

increases.

8.10 Residual heat indicator

When you deactivate the oven, the

display shows the residual heat.

8.11 Lock and Child Safety

Device

Lock and Child Safety

Device function locks the

hob and oven at the same

time.

Refer to Hob - Daily Use chapter.

8.12 Cooling fan

When the appliance operates, the

cooling fan activates automatically to

keep the surfaces of the appliance cool.

If you deactivate the appliance, the

cooling fan can continue to operate until

the appliance cools down.

8.13 Oven automatic switch-off

For safety reasons the appliance

deactivates automatically after some time

if a heating function operates and you do

not change any settings.

Temperature Switch-off time

30 °C - 115 °C 12.5 h

120 °C - 195 °C 8.5 h

200 °C - 245 °C 5.5 h

250 °C - maximum

°C

3.0 h

After the Automatic switch-off, press a

sensor field to operate the appliance

again.

The oven automatic switch-

off does not work with the

Duration or End function.

8.14 Using the Core

temperature sensor

The core temperature sensor measures

the core temperature of the meat.

CAUTION!

Only use the core

temperature sensor supplied

with the appliance, or

genuine replacement parts.

1. Put the point of the core temperature

sensor into the centre of the meat.

Make sure that the core temperature

sensor stays in the meat and in the

socket during the cooking.

2. Put the plug of the core temperature

sensor into the socket on the front of

the appliance.

www.electrolux.com18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comentarios a estos manuales

Sin comentarios