
9. OVEN - CLOCK FUNCTIONS
9.1 Clock functions table
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set countdown time. This function has no effect on the
operation of the appliance.
Duration To set the cooking time of the oven.
End To set the time of day when the oven should deactivate.
You can use the functions
Duration and End at
the same time to set the time
for how long the appliance
should operate and when
the appliance should
deactivate. This lets you
activate the appliance with a
delay in time. First set the
Duration and then the
End .
9.2 Setting the clock functions
For Duration and End set the
oven function and temperature. This is
not necessary for the Minute Minder .
Refer to "Setting an oven function".
1. Use again and again until the
display shows the necessary clock
function.
2. Use or to set the necessary
time.
The clock function operates. The display
shows the indicator for the clock function
you set.
When the time ends the indicator of the
clock function and “00.00” flash and an
acoustic signal sounds for 2 minutes.
The appliance deactivates.
Touch a sensor field to stop the acoustic
signal.
With Duration and End
, the oven deactivates
automatically.
9.3 Activating Heat + Hold (if
applicable)
The temperature for the set
oven function must be above
80°C.
The Heat+Hold function keeps prepared
food warm for 30 minutes after the
cooking is completed.
1. Set the time with the clock functions
Duration
and / or End .
2. Press again and again until the
display shows the symbol Keep
warm .
3. Use and the display shows
“00:30”.
When the function ends, an acoustic
signal sounds. The oven deactivates
automatically.
10. OVEN - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
www.electrolux.com22
Comentarios a estos manuales