Electrolux EOD67043X Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Problem Possible cause Solution
The oven does not heat up The clock is not set Set the clock. Refer to "Setting
the clock"
The oven does not heat up The necessary settings are not
set
Make sure, the settings are
correct
The oven does not heat up The automatic cut-out is
switched on
Refer to "Automatic cut-out"
The oven does not heat up The fuse is released Make sure, if the fuse is the
cause for the malfunction. If the
fuse releases again and again,
refer to an authorized electri-
cian
The oven lamp does not oper-
ate
The oven lamp is defective Replace the oven lamp
The display shows an error
code that is not in this list
There is an electronic fault Switch off the appliance with
the house fuse or the safety
switch in the fuse box and
switch it on again
If the display shows the error
code again, refer to the Cus-
tomer Care Department
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
Warning! Refer to "Safety information"
chapter.
Important! The built-in unit must meet the
stability requirements of DIN 68930.
22 electrolux
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios