Electrolux EASX24C5ATLW Manual de usuario descargar pdf (Pagina 15)

Do not put the end

of drain hose into water.

Do not block

water flow

by a rise.

Connective pipe and drainage installation

Drainage

1. Run the drain hose sloping

downward. Do not install the drain

hose as illustrated below.

2. When connecting extension drain

hose, insulate the connecting part

of extension drain hose with a

shield pipe, do not let the drain

hose slack.

Connective pipe installation

1. For the left-hand and right-hand

piping, remove the pipe cover from

the side panel.

2. For the rear-right-hand and rear-left-

hand piping, install the piping as

shown. Bend the connective pipe to

be laid at 43mm height or less from

the wall.

3. Fix the end of the connective pipe.

Right back

piping

Pipe cover

(left)

Pipe

holder

Pipe cover

(right)

Right piping

Connective

pipe

Indoor unit

outline

43mm

indoor unit installation electrolux 14

Do not block

water flow

by a rise.

1. Pass the piping through the hole in

the wall.

2. Put the upper claw at the back of the

indoor unit on the upper hook of the

installation plate, move the indoor

unit from side to side to see that it is

securely hooked (see Fig.10 &

Fig.11).

Fastening the Indoor Unit

Upper hook

Lower hook

41 electrolux how the air conditioner works

SLEEP mode

Press the sleep button to activate the

sleep mode. To deactivate, press the

button again.

Cold only mode:

• The indoor unit fan operates at a

low velocity.

• After and hour of operation, the

adjusted temperature will increase

1º C. After, the unit keeps

operating 2ºC above the adjusted

temperature.

In heating mode (some models):

• The indoor unit fan operates at a

low velocity.

• After and hour of operation, the

adjusted temperature will decrease

1º C. After, the unit keeps

operating 2º C below the adjusted

temperature.

1 °C

1 hour 1 hour

Set

temperature

SLEEP FUNCTION (Cooling mode)

1 °C

1 °C

1 hour 1 hour

SLEEP FUNCTION (Heating mode)

7 hours

1 °C

Set

temperature

Sleep function is only availaible in

the Cold/Heat and AUTO mode.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios