
CLOCK FUNCTIONS
CLOCK FUNCTIONS
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This
function has no effect on the operation of the appli-
ance. You can also activate it in off state. Use shuttle
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation
(max. 23 h 59 min).
End Time
To set the switch-off time for an oven function (max.
23 h 59 min).
You can use Duration and End
Time at the same time, if you want
to automatically activate and deac-
tivate the appliance on a given time
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Dura-
tion and End Time , the appliance
deactivates the heating elements
after 90 % of the set time. The ap-
pliance uses the residual heat to
continue the cooking process until
the time ends (3-20 minutes).
Setting the clock functions
1.
Set an oven function and temperature
(necessary for Duration and End ).
2.
Press again and again until the dis-
play shows the necessary clock func-
tion and the related symbol.
3.
Use shuttle to set the necessary time.
PressOK to confirm.
After 90 % of the set time, an acoustic
signal sounds. The appliance deacti-
vates. The display shows a message.
4.
Press a sensor field or open the door
to stop the signal.
With Duration and End Time the
appliance deactivates automatical-
ly.
When you use Meat Probe, Dura-
tion and End Time do not work.
EXTRA TIME
The Extra Time makes the oven function
continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
• Not applicable for oven functions with
Meat Probe.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press any sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate.
4.
Set Extra Time period. Press OK to
confirm.
ENGLISH 13
Comentarios a estos manuales