Electrolux AOFP102U Guía para resolver problemas descargar pdf (Pagina 5)

B.1.3 MAINTENANCE CYCLE OR PRESERVATION CYCLE

The maintenance cycle is the maintenance of the food at a

chosen temperature so that it does not alter over time, is started

automatically at the end of the blast chilling or freezing cycle.

The preservation cycle is continuous. To interrupt it you have to

stop or make changes to the program.

B.1.4 STERILISATION CYCLE (appliances with germicidal light

option)

The UV lamps have a direct germicidal action and are used to

sterilise the surfaces and air in the appliance chamber. This

function can be used to sterilize kitchen utensils such as knives,

carving forks, etc. (the process should be done in two steps,

turning the utensils over to make sure both sides of utensils are

sterilized) and can be activated at the end of each working day.

Do not use this function if there is food in the chamber.

ATTENTION:

The appliance has a safety device that switches off the lamps

when the doors are opened. This safety device is provided

because exposure to the U. V. rays emitted by the lamps is

harmful and can cause damage to eyes.

C.1.1 O•I I = ON / O = OFF

This button indicates the status of the appliance: I=On,O=Off.

When appliance is switch on, the whole interface lights up.

C.1.2 START/STOP CYCLE

This button starts or stops the selected cycle.

The selected cycle starts immediately when enabled. To stop

the cycle, keep the button pressed for at least 3 seconds.

If the door is closed when a cycle is started the button will light

up continuously. If the door is opened during a cycle it will start

blinking continuously.

1- "PREP" To optimize appliance performance when the need

arises, a preparation cycle can be chosen at the beginning of

a chilling cycle which is signalled on the temperature display

by the message “PREP”.

2- If the chiller has been inactive for a long time, the compressor

will be started by impulses to guarantee maximum efficiency.

C.1.3 SELECT CYCLES

The default setting on the appliance is the SOFT chilling cycle.

Use these buttons

to select one of the following

options:

From left to right:

• Positive "SOFT CHILLING"

• Positive "HARD CHILLING"

• Positive "COOLER" maintenance (or preservation)

• Negative "BLAST FREEZING" chilling or freezing

• Negative "FREEZER" maintenance (or preservation)

When choosing a cycle, press the

button to move on to

the next option; the options are in a loop and so you can either

scroll forwards

or backwards .

C.1.4 PROGRAMS

Press the

button to set the appliance for programs

mode. The appliance switches from standard cycle selection

mode to program mode and vice versa.

From left to right:

- Program P1

- Program P2

Associated with each standard cycle are 2 default programs that

can be varied by the user.

What is a program? For chilling, the user can change both the

chamber temperature and the chilling time and save the changes

in the memory for subsequent retrieval, and for maintenance the

user can set the chamber setpoint.

C.1.5 TEMPERATURE

The temperature display can display both the chamber tempe-

rature and the food (core) probe temperature.

If a cycle is running (i.e. positive or negative maintenance, timed

positive blast chilling or timed freezing), the temperature

displayed is the chamber temperature.

If a food (core) probe cycle is running, the food (core) probe

temperature will be displayed by default.

Press the

button in chilling cycles to switch between

chamber temperature and food (core) probe temperature.

The indicator light shows which of the two temperatures is being

displayed at that time:

- if the food (core) probe temperature is displayed, the FOOD

CORE PROBE TEMPERATURE INDICATOR LIGHT switches

- if the chamber temperature is displayed the CHAMBER TEM-

C.1 ANALYSIS OF USER INTERFACE

1 2 3 4 5 6 7 8 9 10 ... 18 19

Comentarios a estos manuales

Sin comentarios

Electrolux AOFP102U Guía para resolver problemas Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para No Electrolux AOFP102U