Electrolux AOFP102U Guía para resolver problemas descargar pdf (Pagina 6)

PERATURE INDICATOR LIGHT switches on

Only one or the other can be enabled at one time. Both will not

active at the same time.

C.1.6 ALARM WARNING

The following indicator lights light up when an alarm occurs:

When an HACCP alarm occurs, the indicator light

1- blinks continuously if the alarm is current. To

check the type of alarm, scroll to the utility section

(§ C.1.9) with the keys.

2- stays on continuously if the alarm has ended but

must still be addressed by the user.

When a service alarm occurs, the indicator light

1- blinks continuously if the alarm is current. To

check the type of alarm, scroll to the utility section

(§ C.1.9) with the keys.

2- stays on continuously if the alarm has ended but

must still be addressed by the user.

The type of alarm can be displayed by using the “Utilities menu”

functions (see sections C.1.9 for an explanation of the Utilities

menu, and section C.4 for instructions on how to display the

alarm types and descriptions of the alarms).

C.1.7 STANDARDS

The Standard indicator light is normally off. It lights up only when

the Reference Standard option is entered with the UTILITIES

button.

From left to right, the lights are: Electrolux Food Safe Mode 1,

Electrolux Food Safe Mode 2, U.S. Standard .

To display the appliance Standard setting, use the “Utilities

menu” functions (see sections C.1.9 and C.1.9.4).

minutes

C.1.8 TIME

The time display shows the total and remaining chilling time.

The display is enabled only during the running or selection of

a blast chilling cycle.

The display is switched off during the setting/running of a

maintenance cycle.

The TIMED CYCLE INDICATOR LIGHT

lights up only

when a timed blast chilling cycle is running.

Set the blast chilling time in the selection stage.

C.1.9 UTILITIES

When the button is pressed it lights up behind. Use the

buttons to scroll backwards and forwards and select

the utility. Press

to confirm.

After entering the “Utilities” menu, the system will go back to the

main menu if no button is pressed for 5 seconds.

See below for a DESCRIPTION OF THE UTILITIES FUNCTIONS.

C.1.9.1 MANUAL DEFROSTING

If the appliance is in the right conditions (indicator light

or or with the appliance on stand-by), this function

enables a manual defrosting cycle. The display shows the

message “dEfr” throughout the entire cycle.

If a manual defrosting is not possible (during a chilling cycle) the

message “ UTIL NONE” will appear on the display.

The selection is enabled only in preservation/maintenance and

when selecting the operating cycle.

When the defrosting is finished the system will go back to the

main configuration.

C.1.9.2 PROBE TEMPERATURES DISPLAY

This function displays the probe temperatures, if there is more

than one probe inserted in the product.

If just one probe is used, see section C.1.5 for instructions on

how to display the temperature.

C.1.9.3 "UV"STERILIZATION CYCLE

(Function for appliances with germicidal light option)

The UV lamps have a direct germicidal action and are used to

sterilize the surfaces and air in the chamber of the appliance

(see section B.1.5)

To active "UV", no cycles must be running. When the cycle is

running the “TEMPERATURE” display shows the chamber

temperature. When the cycle is finished the system goes back

to the main menu.

If a sterilization cycle is not possible because of the status of the

appliance, the message “UTIL NONE” will appear on the display.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Comentarios a estos manuales

Sin comentarios

Electrolux AOFP102U Guía para resolver problemas Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para No Electrolux AOFP102U