Electrolux KOBBS21X Manual de usuario descargar pdf (Pagina 10)

5. BEFORE FIRST USE

WARNING!

Refer to Safety chapters.

5.1 Initial Cleaning

Remove all accessories and removable

shelf supports from the oven.

Refer to "Care and cleaning" chapter.

Clean the oven and the accessories

before the first use.

Put the accessories and the removable

shelf supports back to their initial

position.

5.2 First Connection

When you connect the oven to the mains

or after the power cut, you have to set

the language, the display contrast, the

display brightness and the time of the

day.

1. Press or to set the value.

2. Press to confirm.

5.3 Setting the water hardness

The table below shows the water

hardness range (dH) with the

corresponding Calcium deposit and the

quality of the water.

Water hardness Calcium deposit

(mmol/l)

Calcium deposit

(mg/l)

Water clas‐

sification

Class dH

1 0 - 7 0 - 1.3 0 - 50 Soft

2 7 - 14 1.3 - 2.5 50 - 100 Moderately

hard

3 14 - 21 2.5 - 3.8 100 - 150 Hard

4 over 21 over 3.8 over 150 Very hard

When the water hardness exceeds the

values in the table, fill the water drawer

with bottled water.

1. Take the 4 colour change strip

supplied with the steam set in the

oven.

2. Put all the reaction zones of the strip

into the water for approximately 1

second.

Do not put the strip into the running

water.

3. Shake the strip to remove the excess

of the water.

4. Wait 1 minute and check the water

hardness with the table below.

The colours of the reaction zones

continue to change. Do not check the

water hardness later than 1 minute

after test.

5. Set the water hardness: menu: Basic

Settings.

Test strip Water hardness

1

2

3

4

You can change the water hardness in

the menu: Basic Settings / Water

hardness.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comentarios a estos manuales

Sin comentarios