
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO , press any sensor field
(except for
). The set heating function
starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
9.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If an oven function operates.
• If you do not change the oven tempera-
ture.
Oven tempera-
ture
Switch-off time
30 °C - 120 °C 12.5 h
120 °C - 200 °C 8.5 h
200 °C - 250 °C 5.5 h
250 °C - maxi-
mum °C
3.0 h
The automatic switch-off works
with all functions, except Light ,
Duration and End Time .
9.6 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you de-
activate the appliance, the cooling fan
continues to operate until the temperature
in the appliance cools down.
9.7 Safety thermostat
Incorrect operation of the appliance or de-
fective components can cause dangerous
overheating. To prevent this, the oven has
a safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature
drops.
10. HELPFUL HINTS AND TIPS
• The appliance has five shelf levels.
Count the shelf levels from the bottom
of the appliance floor.
• The appliance has a special system
which circulates the air and constantly
recycles the steam. With this system
you can cook in a steamy environment
and keep the food soft inside and crus-
ty outside. It decreases the cooking
time and energy consumption to a mini-
mum.
• Moisture can condense in the appliance
or on the door glass panels. This is nor-
mal. Always stand back from the appli-
ance when you open the appliance
door while cooking. To decrease the
condensation, operate the appliance for
10 minutes before cooking.
• Clean the moisture after each use of
the appliance.
• Do not put the objects directly on the
appliance floor and do not put alumini-
um foil on the components when you
cook. This can change the baking re-
sults and cause damage to the enamel.
10.1 Baking cakes
• Do not open the oven door before 3/4
of the set cooking time is up.
• If you use two baking trays at the same
time, keep one empty level between
them.
ENGLISH 19
Comentarios a estos manuales