Electrolux EOC6851AAX Manual de usuario descargar pdf (Pagina 32)

11.1 Shelf supports

You can remove the shelf supports to

clean the side walls.

Removing the shelf supports

1.

Pull the front of the shelf support away

from the side wall.

2

1

2.

Pull the rear end of the shelf support

away from the side wall and remove

it.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

The rounded ends of the shelf

supports must point to the front.

11.2 Pyrolysis

CAUTION!

If a hob is installed with the appli-

ance, do not use it at the same

time as the Pyrolysis function. It

can cause damage to the appli-

ance.

For steam models only: before

you start the cleaning procedure,

make sure that the water tank is

completely empty. Refer to “Emp-

tying the water tank”.

Remove all accessories from the

appliance.

The cleaning procedure cannot start:

• If you do not remove the shelf support

runners or telescopic shelf runners (if

present).

• If you do not close the appliance door

correctly.

• If you do not unplug the core tempera-

ture sensor (if present).

When the Pyrolysis starts the ap-

pliance door is locked. After the

function finishes the door is

locked for the cool down phase.

Some of the appliance functions

are not available during the cool

down phase.

WARNING!

When the Pyrolysis finishes the

appliance is very hot. Let it cool

down. There is a risk of burns

Pyrolysis :

1.

Remove the worst of the residual dirt

manually.

32

www.electrolux.com

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Comentarios a estos manuales

Sin comentarios