Electrolux EOC6851AAX Manual de usuario descargar pdf (Pagina 33)

2.

Activate the appliance and choose

the Pyrolysis function in the main

menu. Press OK to confirm.

3.

Set the length for the procedure:

– Quick - 1h for a low degree of dirt

– Normal - 1h 30 min for a usual de-

gree of dirt

– Intense - 2h 30 min for a high de-

gree of dirt

4.

Press OK to confirm.

11.3 Oven lamp

WARNING!

Be careful when you change the

oven lamp. There is a risk of elec-

trical shock.

Before you change the oven lamp:

• Deactivate the oven.

• Remove the fuses in the fuse box or

deactivate the circuit breaker.

Put a cloth on the bottom of the

oven to prevent damage to the

oven light and glass cover.

Always hold the halogen lamp

with a cloth to prevent grease res-

idue from burning on the lamp.

1.

Turn the glass cover counterclock-

wise to remove it.

2.

Clean the glass cover.

3.

Replace the oven light bulb with an

applicable 300 °C heat-resistant oven

light bulb.

Use the same oven lamp type.

4.

Install the glass cover.

11.4 Steam generation system

CAUTION!

Dry the steam generator after

each use. Remove the water with

the sponge.

Remove the limescale with water

and vinegar.

CAUTION!

Chemical de-scaling agents can

cause damage to the enamel. Fol-

low the instructions of the manu-

facturer.

Cleaning the water drawer and the

steam generator:

1.

Put the water and vinegar mixture

(approximately 250 ml) through the

water drawer into the steam genera-

tor. Wait for approximately 10 mi-

nutes.

2.

Remove the water and vinegar with

the sponge.

3.

Put clean water (100 - 200 ml) into

the water drawer to flush the steam

generation system.

4.

Remove the water from the steam

generator with the sponge and rub it

dry.

5.

Keep the door open to let the appli-

ance dry fully.

11.5 Cleaning the water tank

WARNING!

Do not put water into the water

tank during the cleaning proce-

dure.

During the cleaning procedure,

some water can drip from the

steam inlet onto the cavity of the

oven. Put a dripping pan on the

shelf level directly below the

steam inlet to prevent water from

falling onto the bottom of the oven

cavity.

After some time, you can have lime de-

posits in your oven. To prevent this, clean

the parts of the oven that generate the

steam. Empty the tank after each steam

cooking.

1.

Fill in the water tank with 900 ml of

water and 50 ml of citric acid (five

teaspoons). Deactivate the oven and

wait for approximately 60 minutes.

2.

Activate the oven and set the True

Fan + Steam function. Set the tem-

perature 230 °C. Deactivate it after 25

minutes and let it cool down for 15

minutes.

3.

Activate the oven and set the True

Fan + Steam function. Set the tem-

perature between 130 and 230 °C.

Deactivate it after 10 minutes. Let it

cool down and continue with the re-

moval of the tank contents (refer to

"Emptying the water tank").

ENGLISH 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

Comentarios a estos manuales

Sin comentarios