Electrolux FAC124P1A Instrucciones de operaciones descargar pdf (Pagina 39)

Section 2 Installation

2-9

Carefully measure and cut an opening with the following

dimensions depending on your model. (See Figure 2-29)

WIDTH “X” = inside model width plus twice the thickness

of framing material used.

HEIGHT “Y” = inside model height plus twice the

thickness of framing material used.

Heavy Duty (FAS) Median (FAM)

Inside Frame Height: 18-7/8“ (47.9cm) 18” (45.7cm)

Inside Frame Width: 26-3/4“ (67.9cm) 23-7/8“ (60.6cm)

4. Build a wooden frame with the INSIDE dimensions

of your model listed above. Frame depth should be

the same as wall thickness. Fill in the space from the

opening to the studs with wood spacers, as shown.

5. Nail frame to spacers with front flush to the dry wall.

(See Figure 2-30)

Figure 2-29.

Figure 2-30.

UP TO

8-1/2"

“X”

“Y”

Inside

Frame

Height

Inside

Frame

Width

Nail Spacers

Level

To Studs

Prepare and Install Cabinet

1. Slide chassis from cabinet. Refer back to Step 1 of

Window Mounting.

2. Place cabinet into opening with bottom rail resting

firmly on bottom board of wooden frame.

3. Position cabinet to achieve proper slope for water

removal. (See Figure 2-32)

4. Secure bottom rail to wood frame with two large

wood screws 1” (2.5 cm) long using the two holes

in the bottom of the channel resting on frame.

(See Figure 2-32)

If wall thickness is 8-½ inches or more, add aluminum

flashing over bottom of frame opening to assure no

water can enter area between inner and outer wall.

NOTE

Caulk As

Aluminum Flashing

Over

Required

Over Bottom Of Frame

8-1/2"

3/4"plus

Trim Thickness

5/16"

Level

3/8"

Figure 2-31.

Figure 2-32.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 139 140

Comentarios a estos manuales

Sin comentarios

Electrolux FAC124P1A Instrucciones de operaciones Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux FAC124P1A