Electrolux FAC124P1A Instrucciones de operaciones Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Section 4 Component Teardown
4-4
Left Bulkhead Partition Removal
The electrical component connections to the control
board are located in the control box located in the upper
left hand corner of the unit. The left bulkhead partition
must be removed first to access all the components in
the control box.
To remove the left bulkhead partition:
1. Disconnect power supply from unit.
2. Remove the front panel assembly. Pull the unit from
the cabinet wrapper/sleeve. Remove the blower
scroll front cover.
3. Pull thermistor from retainer on copper tubing.
4. Remove thermistor from retainer on evaporator.
5. Extract the two screws securing power cord to left
bulkhead partition. (See Figure 4-6)
6. Extract the two screws securing left bulkhead
partition to the evaporator. (See Figure 4-6)
7. Extract screw in the upper right hand corner of left
bulkhead partition. (See Figure 4-6)
8. From left side of unit, extract the screw below the
control box assembly. (See Figure 4-7)
9. To aid in removing the bulkhead, extract the screw
securing the control box to the evaporator mounting
bracket. (See Figure 4-7) Remove thermalmastic
from around ionizer and pull ionizer from slot in
scroll blower housing.
10. Carefully pull the control box and bulkhead towards
the front of the unit to access the screw located
inside the front of the control box that secures the
power cord to the bulkhead, then extract the screw.
11. The bulkhead has a flange that the control box
rests upon. Lift the control box upwards and pull
bulkhead out from under and behind the control box
and over the copper tubings and insulation, then
remove from the unit.
12. Reinstall the screw securing the control box to
the evaporator mounting bracket. This will make
accessing and removing the electrical components in
the control box much easier.
Figure 4-6. View from
Front of Unit
Figure 4-7. View from
Left Side of Unit
Screw
Screws
Screw
Screws
Thermistors
Screw
Ionizer
NOTE: Some models will not feature an ionizer.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 139 140

Comentarios a estos manuales

Sin comentarios