Electrolux FAC124P1A Instrucciones de operaciones descargar pdf (Pagina 91)

Section 4 Component Teardown

4-31

To remove power cord:

6. Extract the two screws securing the power cord to

the lower right front of the unit.

7. Cut all retaining straps holding the power cord to the

evaporator.

8. Disconnect white and black wires from control board.

9. Extract ground screw securing green wire to bottom

of control box.

10. Extract the two screws securing the power cord to

the bottom of the control box. Pull power cord from

unit. (See Figure 4-79)

To remove fan motor capacitor:

11. Disconnect all wire leads from fan motor capacitor.

Label as needed for proper reconnection.

12. Extract screw securing fan motor capacitor to bottom

of control box. (See Figure 4-80)

To remove transformer:

13. Disconnect all wire leads at the control board leading

to the transformer. Label as needed for proper

reconnection.

14. Extract the two screws securing transformer to

bottom of control box. (See Figure 4-80)

To remove the control board:

15. Disconnect all wire leads from control board. Label

as needed for proper reconnection.

16. Compress the plastic retainers securing the control

board to the bottom of the control box and remove

from unit.

To remove the thermistors:

17. Disconnect wire leads from control board.

Thermistor connections at CN2 and CN3 may be

glued to the control board. Carefully remove glue

before attempting to remove the connectors.

(See Figure 4-80)

18. Cut retaining straps securing thermistors to

evaporator.

19. Remove thermistors from the front of the evaporator

and from the tube attached to the evaporator.

Pull wire leds out of control box.

Control

Board

PP44

CCNN33

PP22

PP33

CCNN44

CC NN 11

Screws

Capacitor

Fan Motor

Capacitor

Transformer

Power Cord

Screws

Screw

Ground Screw

Figure 4-80.

Figure 4-79.

Screws

Thermistor

Control Box Removal

To remove the control box from the unit:

1. Disconnect the power supply from unit.

2. Remove front panel and cabinet wrapper/sleeve.

3. Remove control box cover. Discharge capacitor.

4. Disconnect wire leads from condenser fan motor and

compressor. Remove wire leads from control box.

5. Extract screws securing power cord from front of

unit.

6. Control box may now be removed with the power

cord attached.

Thermistor

connections at

CN2 and CN3

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 139 140

Comentarios a estos manuales

Sin comentarios

Electrolux FAC124P1A Instrucciones de operaciones Pagina 91

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux FAC124P1A