Electrolux FAC124P1A Instrucciones de operaciones descargar pdf (Pagina 48)

Section 2 Installation

2-18

6. Securely attach a siding-protection board to the

side of the house where the platform assembly hit

the house. The siding-protection board should be

long enough to span 2 wall studs. (See Figure 2-54)

7. Measure the height of the window opening from

the top of the platform assembly. Subtract 20-5/8”.

Mark this measurement on the plastic window panel

along the longer side. (See Figure 2-55)

8. Clamp the plastic window panel between a board

and a work table, then cut along the line with a fine

tooth saw. Remove any burrs with a file.

9. Fasten the side channels to the sides of the unit

using three screws (Item 17) per channel. Make

sure hook ends of channels face toward the back of

unit.

10. Slide the plastic window panel into the panel frame

with the smooth side to the outside. Slide the panel

frame assembly into the side channels of the air

conditioner cabinet. Make sure the plastic window

panel is firmly enclosed on all sides by the retainer

grooves. (See Figure 2-56)

11. Cut side channel seal into 2 equal lengths. Remove

the protective backing and apply it to the rear side

of the cabinet side channels, starting just below the

panel frame assembly. Pinch off excess length so

the seal is even with the bottom of the cabinet side

channel. (See Figure 2-57)

Fasten Siding

Protection Board To

The House Siding

Figure 2-54.

Measure

distance

and subtract

20-5/8”

Figure 2-55.

Panel Frame

Plastic Window Panel

Figure 2-56.

Apply Weather

Seal To Side

Channels Just

Below Edge Of

Panel Frame.

Figure 2-57.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 139 140

Comentarios a estos manuales

Sin comentarios

Electrolux FAC124P1A Instrucciones de operaciones Pagina 48

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux FAC124P1A