Electrolux FAC124P1A Instrucciones de operaciones descargar pdf (Pagina 54)

Section 3 Electronic Control

3-2

Description of Control Panel Buttons For

Basic Electronic Control

Before you begin, thoroughly familiarize yourself with

the control panel and remote and all its functions. The

unit can be controlled by the touch pad alone or with the

remote.

ON/OFF BUTTON

Pressing the ON/OFF button will turn the unit on or off.

The display will illuminate all the LED’s , then the current

room temperature will be displayed.

UP/DOWN ARROW BUTTONS

(Temperature and Time)

Press or hold either UP (^) or DOWN (v) button until the

desired temperature is seen on display. This temperature

will be automatically maintained anywhere between

60°F (16°C) and 90°F (32°C) for cooling mode. The

Temperature will be automatically maintained anywhere

between 55°F (13°C) and 80°F (27°C) for heating mode

for models with the heating capability.

For setting time, use the UP (^) or DOWN (v) button to

increase or decrease the time desired.

FAN SPEED BUTTON

Press the FAN SPEED button to choose the desired fan

speed and the LED indicator will illuminate at the fan

speed setting. AUTO fan speed is not available in Fan

Only Mode.

AUTO Fan Speed

The unit must be in Cooling Mode or Energy Saver Mode

for AUTO fan speed to be chosen. Press the FAN SPEED

button to chose from AUTO, HIGH, MED and LOW fan

speeds.

The fan speed will begin in HIGH, then adjust to MED

and LOW as the room temperature conditions change.

For example in cooling, if the room doesn’t get too warm

it will stay at LOW. If the room temperature rises quickly,

such as a door being opened, it will automatically go to

HIGH speed. The fan speeds will adjust back to LOW as

the room returns to the original set temperature.

MODE BUTTON

Press the MODE button to chose from FAN ONLY, ENERGY

SAVER and COOL. The LED light will illuminate next to

the MODE chosen.

FAN ONLY Mode:

Use this function only when cooling is not desired, such

as for room air circulation. All Fan speeds except AUTO

are available to be chosen. During this function, the

display will show the actual current temperature, not the

set temperature as in the cooling mode.

ENERGY SAVER Mode:

In this mode, the fan will continue to run for 3 minutes

after the compressor shuts off. The fan then cycles on

for 2 minutes at 10 minute intervals until the room

temperature is above the set temperature, at which time

the unit cooling system starts again.

COOL Mode:

In this mode all fan speeds can be chosen. The LED

indicator will illuminate next to the fan speed as it is

selected. Press or hold either UP (^) OR DOWN (v)

button until the desired temperature is seen on display.

This temperature will be automatically maintained

anywhere between 60°F (16°C) and 90°F (32°C) for

cooling mode.

The “COOL“ circuit has an automatic 3 minute time

delayed start if the unit is turned off and on quickly.

This prevents overheating of the compressor and

possible circuit breaker tripping. The fan will continue

to run during this time.

NOTE

Figure 3-2.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 139 140

Comentarios a estos manuales

Sin comentarios

Electrolux FAC124P1A Instrucciones de operaciones Pagina 54

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux FAC124P1A