Electrolux FAC124P1A Instrucciones de operaciones descargar pdf (Pagina 43)

Section 2 Installation

2-13

B. Choose a proper sized window.

1. 15-1/2 inches minimum width

2. 16-1/4 inches maximum width (casement windows)

3. 21-1/4 inches minimum height (with window panel

retainer)

4. 20-5/16 inches minimum height (window panel

retainer removed)

5. 39-7/16 inches maximum height

C. Choose the proper window location.

Choose a window that allows the cooled air to flow

freely and directly into room(s) you wish to cool.

Remember, it is difficult to move air around corners.

Also, choose a window that is within 6 feet of an

electrical outlet. Do not use an extension cord.

Installing Unit in a Sliding Window

1. Attach support brace to platform as shown. Use

adjustment bolt and hex flange nut to complete

assembly. Choose slot and adjustment bolt hole

locations that will create a 45 degree angle between

platform and support brace. Try assembly in the

window to determine if platform will rest properly,

and allow proper slope (3/16-inch lower on outside).

2. Measure, and lightly mark a line 8-11/16 inches

from window jamb.

16-1/4”

Maximum

Width

(Casement

Windows)

15-1/2”

Minimum

Width

20-5/16”

Minimum

Height

39-7/16”

Maximum

Height

Figure 2-37.

Height measurement must be of a clear opening above

mounting platform. In some cases, due to a variety

of stop and track arrangements, the above dimensions

may vary slightly. If necessary, installation can be

made by alternating window jambs. (See Alternate

Window Jamb Applications.)

NOTE

If you are planning to use a siding protection board on

the outside of house, hold board in place when testing

assembly in window.

NOTE

If any sash stop protrudes more than 1 inch from the

side window jambs, the 8-11/16-inch measurement

must be increased accordingly. Screen and storm

window frames may also require adjustments to the

measurement.

NOTE

Platform Assembly

Hex Flange Nut

8-11/16” inches

Center Platform

Assembly On The

Line With Platform

Tab Pressed Against

Window Track

Alternate Screw Location

(Depending On The Stool Depth)

Platform Tab

Window Track

Window Seal

1/4” (6mm)

Figure 2-38.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 139 140

Comentarios a estos manuales

Sin comentarios

Electrolux FAC124P1A Instrucciones de operaciones Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux FAC124P1A